Spray applied plasters have been widely used in Europe since the 1960’s and is today one of the main forms of plastering used in modern building systems.
Terraco with its Sprayplaster systems is a market leader in spray-applied surface preparation compounds.
Terraco Sprayplaster is the ideal solution for large fast-track projects or indeed any project – where cost, time and quality are of paramount importance! Specified by architects, used by builders!
Terraco offers two main types of renders:
Sprayplaster is a range of ready-mixed and polymer modified cementitious, spray applied plasters. Sprayplaster has been applied on millions of square metres of walls and ceilings around the globe every year. These are long-life products with guaranteed performance.
Designed for thin coat application, Sprayplaster significantly reduce the deadweight of buildings – 10mm of Sprayplaster will weigh approximately 18 kg/m² while a traditional plaster, applied at the typical minimum thickness of 15mm, will weigh approximately 33 kg/m². A weight reduction of 45%!
Terramix is a range of cementitious trowel or spray applied plasters. Formulated for plastering and repair of exterior and interior surfaces of cast in-situ concrete, lightweight concrete, fair-faced dense concrete, blockwork and brickwork. It provides a hard, smooth, water resistant finish which is suitable for painting and wall papering.
Terramix is both hydraulically and organically bound, guaranteeing excellent adhesion to the substrate. It is also ideally suited for application as a basecoat in the Terraco Sprayplaster system.
Available in three grades: Standard, Fine and Coarse – in two colours, grey and white.
Please contact your Terraco representative for further technical assistance.
Terramix Standard is a polymer modified, cementitious, masonry repair mortar / plaster ideal for repairs and levelling up to 3 – 5mm thickness.
Terramix Fine is a repair mortar and thin layer plaster for repairs and levelling up to 1 – 3mm thickness.
Terraco Sprayplaster Finishcoat is an acrylic based, low VOC, ready to use compound of inert filler materials, for use on all common types of interior building surfaces
Check out our comprehensive range of jointing, skimming and surface preparation products.
Handycoat Gypsum Joint Compound is a ready to use filler for use as a jointing compound and skim coat for gypsum boards.
Designed to repair and reface concrete, these shrinkage-compensated concrete repair compounds are produced to the strictest quality standards.
High performance, self-levelling floor compound used to level concrete floors and screeds prior to application of final finishes.
Terraco offers a comprehensive range of primers for use in conjunction with the various finishing systems in our catalogue.